Invalid Link Provided, Please Login From Exe Nck Error Updated FREE

Invalid Link Provided, Please Login From Exe Nck Error

SP Flash Tool is a flashing application that helps to accept a backup of your device'due south firmware or flash the firmware back to your device. It is compatible with the MediaTek powered devices and works with almost all the MediaTek Devices similar Smartphones, Smartwatches, etc. Tough the application is elementary to use, merely it throws many errors without the proper information. So, today nosotros are going to share the list of SP Wink Tool errors (BROM Errors) and give their meanings and solutions to fix them. We have covered almost all the SP Wink Tool errors on this page, and if nosotros have missed any, then you lot can post them in the comment section below.

Then, let's now proceed to set up SP Flash Tool or Fix BROM Errors on your PC.

Table of Contents

• 1 How to Fix SP Wink Tool Errors (BROM Error Codes):
  • 1.1 SP Wink Tool Failed to enumerate COM Port
  • one.2 The device automatically disconnects during flashing
  • 1.iii SP Wink Tool remains at 0%
  • 1.4 Error: Initialize scatter file failed. Delight check the scatter file name you load is legal
  • 1.5 Error: USB device not recognized
  • 1.half-dozen Error: Please select i ROM at least before execution
  • 1.7 Error: PRO_INFO: Failed to get PMT info
  • ane.8 Error 1002: S_INVALID_ARGUMENTS
  • 1.ix Mistake 1012: BROM Fault: S_NOT_ENOUGH_MEMORY (1012)
  • 1.ten Fault 1003: S_COM_PORT_OPEN_FAIL (1003)
  • 1.11 Error 1013: BROM Fault: S_COM_PORT_OPEN Fail (1013)
  • ane.12 Mistake 1011: S_NOT_ENOUGH_STORAGE_SPACE
  • i.xiii Error 1022:
  • 1.xiv Mistake 1040: S_UNSUPPORTED_OPERATION (1040)
  • one.xv Fault 1042: BROM ERROR: S_TIMEOUT (1042)
  • 1.sixteen Mistake ii: BROM ERROR: ?? (two)
  • 1.17 Error 4008: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
  • 1.xviii Error 2004: BROM Fault : S_FT_DOWNLOAD_FAIL (2004)
  • one.nineteen Mistake 2005: BROM Mistake: S_BROM_CMD_STARTCMD_FAIL (2005)
  • 1.20 Error 2020: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
  • ane.21 Fault 3001: S_DA_EXT_RAM_ERROR
  • 1.22 Error 3012: NAND_FLASH_NOT_FOUND
  • 1.23 Error 3140: BROM ERROR: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED
  • 1.24 Fault 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)
  • i.25 Error 3149: BROM Error : S_DA_SDMMC_WRITE_FAILED (3149)
  • ane.26 Error 3168: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3168)
  • 1.27 Error 3182: BROM ERROR: S_STORAGE_NOT_MATCH (3182)
  • i.28 Mistake 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)
  • 1.29 Fault 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)
  • 1.xxx Error 4001: S_FT_DA_NO_RESPONSE or Da didn't send response data to Flash Tool
  • 1.31 Fault 4004: Driver Error
  • 1.32 Error 4009: S_FT_READBACK_FAIL (4009)
  • 1.33 Error 4010: BROM ERROR : S_FT_FORMAT_FAIL
  • 1.34 Error 4017: BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)
  • 1.35 Error 4032: BROM Error : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM neglect
  • 1.36 Mistake 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL
  • ane.37 Error 4058: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
  • 1.38 Fault 5002: S_INVALID_DA_FILE
  • ane.39 Error 5007: BROM Error : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
  • 1.forty Error 5054: BROM Mistake S_DL_GET_DRAM_SETTINGS_FAIL (5054)
  • one.41 Error 5069: BROM Fault : S_DL_PMT_ERR_NO_SPACE (5069)
  • 1.42 Error 5056: BROM Fault : S_DL_PMT_ERR_NO_SPACE (5056)
  • 1.43 Error 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR
  • ane.44 Error 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)
  • ane.45 Fault 6010: BROM Error: SP FLASHTOOL Mistake 6010 Lawmaking DOWNLOAD FORBIDDEN
  • one.46 Error 6012: BROM Mistake: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP Error Lawmaking: 0X00
  • 1.47 Mistake 6047: BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL
  • i.48 Error 6124: BROM Mistake: S_SECURITY_INVALID_PROJECT (6124), MSO Fault Lawmaking: 0X00
  • 1.49 Error 8038: Error 8038! Android download pmt is set up, and layout has been changed / PMT inverse for the ROM
  • i.fifty Fault 8100:
  • ane.51 Error 8200:
  • 1.52 Error 8406: SP FLASH TOOL ERROR (8406)
  • i.53 Fault 8417: BROM ERROR: Initialize besprinkle file failed. Delight check the scatter file name y'all load is legal
  • i.54 Stuck at Download DA 100%
  • one.55 SP Wink Tool flashing process was successful, but the telephone'southward scale doesn't work
  • ane.56 USB device not recognized
  • 1.57 Error 0xFDA: BROM Error: S_FT_GET_MEMORY_FAIL (0xFDA)
  • 1.58 Mistake 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
  • i.59 Error 0x3: BROM Mistake:?? (0x3)
  • 1.60 Mistake 0x7D4: BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
  • 1.61 Error 0x8: BROM ERROR:?? (0x8)
  • 1.62 Fault OXFC0: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
  • 1.63 Fault 0X411: BROM Mistake: S_CHKSUM_ERROR (0X411)
  • 1.64 Fault 0xFA1: BROM Mistake: S_FT_DA_NO_RESPONSE (0xFA1)
  • 1.65 TOOL DL image Neglect!
  • 1.66 Error 0xFC0: BROM Fault: S_FT_ENABLE_DRAM_FAIL (0xFC0)
  • ane.67 Fault 0xC0050003: BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)
  • 1.68 Error 0xc002002A: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)
  • 1.69 Mistake 0XFA8: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)
  • 1.70 Fault 0x7D5: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)
  • 1.71 Error: Boundary Check Failed: rom_end_addr >= side by side rom begin_addr.
  • one.72 Fault 3179: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3179)
  • 1.73 Error 5073: BROM Fault: S_DL_READ_PT_FAIL (5073)
  • one.74 SP Wink Tool force-closes when scatter file is loaded
  • 1.75 Storage type mismatch!
  • 1.76 Error 8045: No Valid Partition Direction Table (PMT) for storage
  • i.77 Mistake 1041: BROM ERROR: S_CHKSUM_ERROR (1041)
  • one.78 Error 6126: BROM Fault: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE Lawmaking: 0x00
  • 1.79 Error 6128: BROM Error: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP ERROR Lawmaking: 0X00
  • 1.lxxx Mistake 0xC0050005: ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)
  • 1.81 Error (iii): BROM Error:?? (iii)
  • 1.82 Mistake 6104: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR Code: 0X00
  • one.83 Error 3183: BROM Error: S_CHIP_TYRE_NOT_MATCH (3183)
  • 1.84 Error 0xC0060001: BROM Error: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)
  • 1.85 Fault: PMT inverse for the ROM; it must exist downloaded
  • 1.86 Error 6004: ERROR: S_SECURITY_SLA_FAIL (6004), MSP ERROE Code: 0X00
  • i.87 Error 6045: S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045), MSP ERROE CODE: 0x00
  • 1.88 Error 2035: BROM ERROR: S_BROM_CMD_JUMP_DA_FAIL (2035)
  • 1.89 Error 0x412: BROM ERROR: S_TIMEOUT (0X412)
  • 1.90 Error 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE CODE: 0x00
  • ane.91 Error 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]
  • 1.92 Error 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)
  • 1.93 Error 0xC52: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (0XC52)
  • 1.94 Error 0XFAA: BROM Fault: S_FT_FORMAT_FAIL (0XFAA)
  • ane.95 Mistake 5072: Fault: S_DL_WRITE_PT_FAIL (5072)
  • 1.96 Fault 0xC0070004: ERROR: STATUS_DA_HASH_MISMATCH (0xC0070004)
  • 1.97 Error 6046: BROM ERROR: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP Mistake Code: 0X0
  • ane.98 Mistake 0XC0060003: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
  • 1.99 Fault 0x94010000: Bit TYPE Not match! target pass up value: 0x94010000
  • 1.100 Mistake 0xC0020029: BROM ERROR: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)
  • i.101 Error 5000: BROM Error: S_AUTH_HANDLE_IS_NOT_READY (5000)
  • 1.102 Error 0xC002002C: ERROR: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)
  • 1.103 Error 0xC0030012: Error: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)
  • 1.104 Error 0xC0060005: Error: STATUS_BROM_CMD_FAIL (0xC0060005)
  • 1.105 Error 8: Mistake: ?? (8)
  • ane.106 Error 0xC0030001: Mistake: STATUS_SCATTER_FILE_INVALID (0xC0030001)
  • 1.107 Error: Partition[nvram] should Non set "is_download" to truthful in scatter file
  • ane.108 Error 0xC0050001: ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
  • ane.109 Fault 0xC002001B: ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)
  • 1.110 Error 5014: Error: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)
  • 1.111 Fault 0x7F3: BROM Mistake: S_BROM_CMD_JUMP_DA_FAIL
  • i.112 Error 3154: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3154)
  • 1.113 Error 0xC0010005: BROM Mistake: STATUS_PROTOCOL_ERR (0xC0010005)
  • one.114 Error 0xC0010007: BROM Mistake: INSUFFICIENT_BUFFER (0xC0010007)
  • 1.115 Error 0xC0050007: ERROR: STATUS_READ_DATA_EXCEPTION (0xC0050007)
  • 1.116 Error 0x13CD: BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069)
  • i.117 Error: LIB DA not friction match, please re-select DA or ask for assistance
  • one.118 Error -1073283068: BROM ERROR: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE Lawmaking: 0X00
  • 1.119 Error 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)
  • one.120 Error 3152: S_DA_SDMMC_CONFIG_FAILED (3152)
  • 1.121 Mistake 0xC0020006: Mistake: STATUS_SEC_PL_VFY_FAIL (0xC0020006)
  • 1.122 Mistake 0xC0030003: Fault: STATUS_DA_SELECTION_ERR (0xC0030003)
  • 1.123 Error 0xC0030008: ERROR: STATUS_INVALID_GPT (0xC0030008)
  • 1.124 Error 0xC0050004: ERROR: STATUS_UPLOAD_EXCEPTION (0xC0050004)
  • ane.125 Error 0x1: ERROR: ?? (0x1)
  • 1.126 Error 0xC0030004: Error: STATUS_PRELOADER_INVALID 0xC0030004
  • 1.127 Mistake 1003: ERROR: S_INVALID_BBCHIP_TYPE (1003)
  • 1.128 Mistake 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)
  • i.129 Fault 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)
  • 1.130 Error 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Where to Download SP Flash Tool Latest and Older Versions?

Download the latest and older versions of the SP Wink Tool from Go SP Flash Tool.

How to Set up SP Flash Tool Errors (BROM Fault Codes):

SP Wink Tool Failed to enumerate COM Port

This error clearly means that the Flash Tool has problems finding the COM port on which your device is continued.

Solution:

1. Brand certain to run SP Flash Tool as administrator on your computer. (A viewer suggested this solution, every bit it helped him fix the failed to enumerate COM Port outcome.)
2. Connect your lookout man to another Port and make certain you lot have USB Drivers installed.
3. Open up "Device Manager" and notice the COM port of the device yous connected. Once found, open Flash Tool, click on Options -> COM Port -> Select the COM Port on which you have connected your device.

The device automatically disconnects during flashing

Meaning: Device disconnects as soon as the flashing process begins, interrupting the process.

Solution:

1. Try a different USB Cord, USB Port & PC
2. Agree the Volume Down or Up button while connecting the device to the PC for flashing

SP Wink Tool remains at 0%

Solution:

1. Install necessary MediaTek VCOM drivers on PC.
2. Use the latest version of SP Flash Tool - Download

Follow the troubleshooting guide on how to fix the Wink tool Stuck at 0% (waiting) issue.

Error: Initialize scatter file failed. Please check the scatter file name y'all load is legal

Meaning: SP Flash Tool doesn't take the name of the scatter file.

Solution:

1. Make sure the scatter file was not renamed.
2. Try a higher version of SP Flash Tool [Download]

Error: USB device not recognized

This error occurs while yous connect your device to the PC. It shows a prompt on the organization tray later connecting your device.

Meaning: PC is having trouble communicating with your device (Information technology occurs due to interruption, hardware, or driver problems).

Solution:

1. Try a different USB String, USB Port, or PC.
2. Install the latest MediaTek USB drivers on PC.

Fault: Please select one ROM at least earlier execution

Meaning: SP Flash Tool fails to recognize that there is an detail ticked.

Solution:

1. Select the Scatter file over again and untick all the items which y'all don't want to flash ane by one. Don't apply the checkbox, which un-ticks all the things at once and then checks one by one.

Error: PRO_INFO: Failed to become PMT info

Pregnant: SP Wink Tool is having problems reading the phone.

Solution:

1. Utilise different PC and USB Cable.
2. Ensure that the telephone is powered off with a charged battery inside when connecting.

Annotation: Some phones crave you to remove the bombardment while flashing. In this case, Solution 1 is the one you should follow.

Error 1002: S_INVALID_ARGUMENTS

Meaning: Invalid Scatter file.

Solution: Load the correct besprinkle file.

Error 1012: BROM Mistake: S_NOT_ENOUGH_MEMORY (1012)

Meaning: The version of SP Flash Tool doesn't support the size(southward) of the file(s) in the firmware or ROM.

Solution:

1. Use the latest version of Flash Tool [Download]

Error 1003: S_COM_PORT_OPEN_FAIL (1003)

Meaning: SP Flash Tool encountered an fault while communicating with the device via the target port.

Solution:

1. Connect the device to a different USB Port on the PC
2. Endeavour dissimilar versions of SP Flash Tool [Download]
3. Attempt using dissimilar USB Cable
4. Make sure the device's USB port is not damaged

Fault 1013: BROM Error: S_COM_PORT_OPEN Fail (1013)

Meaning: SP Flash Tool encountered an error while communicating with the device via the target port.

Solution:

1. Connect the device to a different USB Port on the PC
2. Endeavor different versions of SP Flash Tool [Download]
3. Endeavor using different USB Cablevision
4. Make sure the device's USB port is non damaged

Error 1011: S_NOT_ENOUGH_STORAGE_SPACE

Meaning: The size of any function of the firmware is larger than the allotted space (ordinarily a block or cadre)

Solution:

1. Modify the version of the SP Wink Tool. Download from hither.

Note: Information technology is learned that this error sometimes occurs on the "raw" versions of the flash tool. And so irresolute the version might help.

Error 1022:

Meaning: The version of the SP Flash tool is non uniform with your device, or the USB interface is not working.

Solution:

1. Use the different or latest version of SP Flash Tool - Download
2. Change USB Cable or USB Port.

Mistake 1040: S_UNSUPPORTED_OPERATION (1040)

Significant: Flash kick files & Scatter.txt don't friction match.

Solution:

1. Make certain the right scatter file is loaded.

Error 1042: BROM Mistake: S_TIMEOUT (1042)

Meaning: The flashing procedure took likewise long, and the SP Wink Tool encountered a timeout.

Solution:

1. Try flashing one file at a time
2. Use the latest version of SP Wink Tool [Download]
3. Apply different PC and USB Cable

Error 2: BROM Mistake: ?? (2)

Pregnant: SP Wink Tool was unable to communicate with the device.

Solution:

1. Try using a different PC (preferably Windows seven)
2. Install MediaTek USB Drivers on PC
3. Employ another USB Cable

Mistake 4008: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)

Meaning: There is an interruption betwixt the SP Flash Tool and the device communication, and the SP Wink Tool encountered an mistake while flashing files.

Solution:

1. Accept out the battery and re-insert information technology back.
2. Apply different USB Cable, Port, and PC.
3. Correct click flash_tool.exe -> Backdrop -> Compatibility -> Fix to Windows XP Service Pack 3 -> Apply -> OK -> Run flash_tool.exe as ambassador.
4. Brand sure the battery has plenty accuse left.

Error 2004: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)

Meaning: There is an interruption betwixt the SP Flash Tool and the device communication, and the SP Flash Tool encountered an error while flashing files.

Solution:

1. Accept out the battery and re-insert it back.
2. Employ different USB Cable, port, and PC.
3. Right click flash_tool.exe -> Backdrop -> Compatibility -> Gear up to Windows XP Service Pack 3 -> Employ -> OK -> Run flash_tool.exe as ambassador.
4. Make sure the battery has enough accuse left.

Error 2005: BROM Error: S_BROM_CMD_STARTCMD_FAIL (2005)

Significant: Device attempted to ability on before SP Wink Tool could wink the files to it.

Solution:

1. Take out the battery and re-insert information technology dorsum.
2. Use different USB Cable, port, and PC.
3. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack iii -> Apply -> OK -> Run flash_tool.exe every bit administrator.
4. Make sure the battery has enough accuse left.

Mistake 2020: BROM Fault : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)

Meaning: Wink Tool encountered a problem moving files to exist flashed to the device's internal SRAM.

Solution:

1. use the latest version of the SP flash tool [Download Hither]
2. In SP wink tool, navigate to Options > Option > Connectedness > Battery. Set it to "with battery".
3. Use the Format all + Download pick
4. Concord both book buttons before connecting to the PC for flashing and release in one case flashing begins

Error 3001: S_DA_EXT_RAM_ERROR

The SP Wink Tool Mistake 3001 occurs due to connectedness problems. Check the cable and reconnect to another port. If it still occurs, try using a different PC.

Error 3012: NAND_FLASH_NOT_FOUND

Meaning: Problem associated with the definition of flash memory.

Solution:

1. Apply the unlike version of wink tools - Download
2. Use different PC, USB Cable, and USB Port.

Error 3140: BROM Error: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED

Meaning: SP wink tool encountered an error flashing a selected file to a not-specified partition

Solution:

1. Use the latest version of SP Flash Tool - Download
2. Utilise format pick and so download in SP Flash Tool

Error 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)

Meaning: Flash kick files and besprinkle mismatch. Notation EMMC partition device and MTD sectionalisation device use different TXT boot files.

Solution:

1. Choose the correct Scatter file.
2. Apply a different PC (preferably Windows XP) with all the drivers loaded.

Error 3149: BROM Error : S_DA_SDMMC_WRITE_FAILED (3149)

Meaning: SP Wink tool is unable to wink files to the device.

Solution:

1. Use the latest version of the SP flash tool and run it every bit ambassador. [Download here]
2. Format showtime then Download
3. Don't tick a box with an unspecified/empty file path
4. Ensure the phone is switched off and has enough accuse before connecting to the PC for flashing
5. Try a different PC
6. Endeavour a unlike ROM
7. Endeavor a different USB cord
8. Try formatting the telephone start before flashing files to it

Fault 3168: BROM Mistake: S_CHIP_TYPE_NOT_MATCH (3168)

Significant: SP Flash Tool detects that there is a mismatch between the information provided in the scatter file and the device'south info.

Solution:

1. Make sure you are using the right ROM file for your device.
2. Utilize the college version of SP Flash Tool - Download hither
3. Install right drivers on PC.

Mistake 3182: BROM Fault: S_STORAGE_NOT_MATCH (3182)

Significant: The firmware you are trying to flash is non uniform with your device.

Solution: Attempt getting the advisable firmware for your device model.

Error 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)

Meaning: The firmware you are trying to flash is non compatible with your device.

Solution: Endeavor getting the advisable firmware for your device model.

Error 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)

Pregnant: The firmware y'all are trying to flash is not compatible with your device.

Solution: Attempt getting the appropriate firmware for your device model.

Fault 4001: S_FT_DA_NO_RESPONSE or Da didn't transport response information to Flash Tool

Meaning: SP Flash Tool facing trouble communicating with the device.

Solution:

1. Use a different USB Port.
2. Install MediaTek VCOM drivers on PC.
3. Run Flash_tool.exe as administrator.
4. Use a different PC (preferably Windows 7 or XP).
5. Endeavour different USB Cable.

Fault 4004: Driver Error

Meaning: Drivers non constitute or corrupted.

Solution: Uninstall drivers and re-install them.

Mistake 4009: S_FT_READBACK_FAIL (4009)

Meaning: SP Flash Tool failed to create a Readback file, possibly due to not plenty space for a file or file cannot be overwritten because it is locked.

Solution:

1. Employ the dissimilar version of SP Flash Tool [Download]
2. Delete old Readback files

Error 4010: BROM ERROR : S_FT_FORMAT_FAIL

Significant: The blocks map in the besprinkle file doesn't match the device's division sizes

Solution:

1. Utilise the right firmware for your device model.
2. Use the latest version of SP Flash Tool [Download]

Fault 4017: BROM Fault: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)

Meaning: You're trying to flash a file that has non been processed for flashing via the SP flash tool

Error 4032: BROM Fault : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Pregnant: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:

1. Ensure that the firmware you are flashing is made for your device model.
2. Delete the SP Flash Tool binder and re-extract it.
3. Ensure you tick the boxes for but the files nowadays in the ROM you're about to wink
4. Might have the wrong commuter installed. Uninstall the VCOM, Preloader, and MTK drivers and re-install them.

Error 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL

Pregnant: The SP Flash Tool Mistake Code 4050 occurs when block sizes are non the aforementioned in the PMT and besprinkle. In general, this error is treated to download all the blocks (i tin can utilize data enough), and so the size in the PMT should switch to the right.

Solution:

1. Use a unlike version of Flash Tool - Download

Mistake 4058: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)

Significant: Flash tool was unable to locate the sectionalisation y'all're trying to flash.

Solution: Un-tick any item with a blank or empty location

Error 5002: S_INVALID_DA_FILE

Meaning: The Download Agent (DA) file selected is not compatible. DA file is attached to the Flash Tool release, so cull the one which is provided in the Flash Tool folder.

Solution:

1. Choose the DA file from the SP Wink Tool folder.

Error 5007: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

Meaning: You're trying to wink a file with the unspecified path (no file selected in the detail box)

Solution:

1. Brand certain the besprinkle file is in the same folder where the other files to exist flashed are located.
2. Untick any particular whose file yous practice not accept or whose path is non specified.

Error 5054: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)

Pregnant: The files you are trying to wink are not compatible with the device.

Solution:

1. Ensure you are using the correct files.

Error 5069: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

Meaning: The size of a file is larger than the available partition size.

Solution:

1. Ensure that you are flashing the right files to the device.
2. Attempt another ROM.

Error 5056: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5056)

Significant: The size of a file is larger than the available partitioning size.

Solution:

1. Ensure that you are flashing the right files to the device.
2. Endeavour some other ROM.

Fault 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR

Meaning: Wrong files. The Scatter file of the chosen folder is not yet prepared for the FT files.

Solution:

1. Choose the correct besprinkle file prepared for the FT files.

Error 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)

Pregnant: When you lot choose the wrong file, for example, another type of flash downloads into the current flash, the tool will warn with this message. The chosen flash files are not uniform with your device.

Error 6010: BROM ERROR: SP FLASHTOOL ERROR 6010 CODE DOWNLOAD FORBIDDEN

Pregnant: The device has a protected or locked bootloader.

Solution: Unlock the bootloader on your device.

Error 6012: BROM Mistake: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP Mistake Code: 0X00

Pregnant: The Download-Amanuensis beingness used is incompatible with the device.

Solution: Prepare Download-Agent to MTK_AllInOne_DA.bin

Fault 6047: BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL

Meaning: Hash (integrity) check of the files being flashed failed.

Solution:

1. Apply SP Flash Tool V5.1516.00 from here
2. Select the right Download Agent file
3. Navigate to Options > Pick > Download and untick DA DLL All…

Error 6124: BROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR CODE: 0X00

Pregnant: Wrong flash settings or firmware.

Solution:

1. Use the correct firmware for your verbal device model
2. Select the correct Download Agent file in the SP flash tool
3. Go to Options > Choice > Connection > USB Speed > Full Speed
4. Get to Options > Pick > Download > Untick DA DL All with Checksum

Error 8038: Error 8038! Android download pmt is ready, and layout has been changed / PMT changed for the ROM

Meaning: SP Flash Tool is having trouble writing to sure partitions due to some incompatibility.

Solution:

1. Format the phone in the SP flash tool (Do not format bootloader) then endeavor flashing the files again using Download
2. If Download doesn't work then do a firmware upgrade
3. If the MTK backup contains more than one scatter file, retry flashing with the other scatter file.
4. If that isn't feasible, effort formatting first or use the firmware upgrade
5. If that doesn't piece of work, open the scatter file using Notepad++ and change __NODL_FAT to Fatty by removing "__NODL_".

Mistake 8100:

Meaning: Cannot find the USB port.

Solution:

1. Install the Drivers. If already installed, uninstall them and re-install them over again.

Error 8200:

Meaning: Invalid file or incompatible recovery file.

Solution:

1. Detect the right recovery file.
2. Use the latest version of the SP Flash Tool. [Download Here]

Fault 8406: SP FLASH TOOL ERROR (8406)

Meaning: Compatibility issues.

Solution:

1. Flash the right firmware for your exact device model.
2. Update VCOM drivers.

Error 8417: BROM Mistake: Initialize scatter file failed. Delight check the scatter file name you load is legal

Meaning: The format of the Besprinkle file is invalid.

Solution:

Open up the besprinkle file in Notepad++, the start line must kickoff with:

############################################################################################################## Full general Setting #

If in that location is annihilation else above this then delete it and salve the scatter file.

Stuck at Download DA 100%

Meaning: SP Wink Tool is having problem communicating with your device.

Solution:

1. Uninstall and re-install MediaTek drivers.

SP Flash Tool flashing process was successful, but the phone'due south scale doesn't work

If, after flashing the files using SP Flash Tool soft keys and impact doesn't work or respond, follow the below solution.

Solution:

Edit the scatter file using Notepad++ and remove the NODL_ (or prepare is_download: fake to is_download: truthful) in forepart of the items you have in the backup binder but aren't listed when you load the besprinkle file in the SP flash tool. Removing NODL_ or setting is_download to true makes the item listed/available in the SP flash tool when y'all load the scatter file later on saving it.

USB device not recognized

Meaning: The PC is having problem communicating with your device considering of interruption, hardware, or driver problem.

Solution:

1. Remove and install the MediaTek MTK drivers again on your PC.
2. Try a different USB cable.
3. Connect the device to a different USB Port.
4. If the above solutions don't work, try using some other PC.

Error 0xFDA: BROM ERROR: S_FT_GET_MEMORY_FAIL (0xFDA)

Meaning: SP Flash Tool encountered an error reading your device'south storage.

Solution:

1. Try a different USB cable.
2. Connect the device to a different USB Port.
3. If the in a higher place solutions don't work, try using some other PC.

Error 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

Meaning: The firmware y'all are trying to wink is either non compatible or you have selected the wrong flashing settings.

Solution:

1. Brand sure that the firmware you are trying to wink is really for your device model.
2. Only tick the boxes but for the files which are available in the ROM folder yous're trying to flash.

Error 0x3: BROM Fault:?? (0x3)

Meaning: SP flash tool encountered an fault maintaining the connection with the device during the flashing process.

Solution:

1. Uninstall and re-install MTK VCOM drivers on your PC.
2. Try a different USB cable.
3. Connect the device to a different USB Port.
4. If the above solutions don't work, try using another PC.

Fault 0x7D4: BROM Fault: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)

Meaning: SP Wink Tool encountered an error writing to the device.

Solution:

1. Attempt changing the Download Agent (Secure Boot DA) file.
2. Use the latest version of SP Wink Tool – Download here.
3. Make certain that your device's battery is sufficiently charged.
4. Make certain the device's USB port is not damaged.
5. Ensure that the file names match what's in the besprinkle file.
6. Endeavour a different USB cable.
7. Connect the device to a dissimilar USB Port.
8. If the above solutions don't piece of work, endeavor using some other PC.

Fault 0x8: BROM Error:?? (0x8)

Meaning: The size of the file you are trying to flash is larger than the division size.

Solution:

1. Ensure that the files you're trying to flash are actually for your device's verbal model.
2. Attempt some other Stock ROM.
3. Change the phone's EMMC chip.
4. Try using a different PC.

Error OXFC0: BROM Error S_FT_ENABLE_DRAM_FAIL (OXFC0)

Meaning: The firmware you're trying to wink is either not compatible with your device or you lot have selected the wrong flashing settings.

Solution:

1. Ensure that the files you're trying to flash are actually for your device'south verbal model.
2. Only tick the boxes only for the files which are available in the ROM you're trying to wink.
3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
4. Apply the latest version of the Smartphone Flash Tool.
5. Delete the SP Wink Tool folder and re-excerpt it.
6. Ensure that the phone is powered off (with the bombardment inserted) earlier connecting to the PC for flashing.
7. If the above solution doesn't work, and then y'all can try holding down the Volume Down push button and connect the phone to the PC. You can besides try property Book Upward, Power and Volume Down, Power, and Volume UP buttons.
8. Format the phone from Settings before trying to wink the files again.

Error 0X411: BROM ERROR: S_CHKSUM_ERROR (0X411)

Meaning: At that place was a checksum fault when flashing the firmware.

Solution:

1. Delete any file with the checksum in its name from the ROM/firmware folder.
2. Go to Options > Option > Download > Un-tick DA DL all with checksum.

Fault 0xFA1: BROM ERROR: S_FT_DA_NO_RESPONSE (0xFA1)

Meaning: SP flash tool encountered an error communicating with the device.

Solution:

1. Install MTK VCOM drivers on your PC. If already installed, uninstall and re-install them.
2. Ensure that the device is powered off and has charged battery inserted.
3. Do not hold any push button when connecting the device to the PC for flashing.
4. Endeavour a unlike USB cablevision.
5. Connect the device to a different USB Port.
6. If the above solutions don't work, attempt using another PC.

TOOL DL image Fail!

Meaning: DA DL all with the Checksum option, is disabled in the SP wink tool.

Solution:

1. In SP Wink Tool, navigate to Options > Option > Download > Tick DA DL all with checksum and re-flash the firmware.

Error 0xFC0: BROM Fault: S_FT_ENABLE_DRAM_FAIL (0xFC0)

Significant: The firmware you're trying to wink is either non compatible with your device or you have selected the wrong flashing settings.

Solution:

1. Ensure that the files y'all're trying to flash are actually for your device's verbal model.
2. Only tick the boxes only for the files which are available in the ROM you're trying to flash.
3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
4. Employ the latest version of the Smartphone Wink Tool.
5. Delete the SP Flash Tool folder and re-extract it.
6. Ensure that the telephone is powered off (with the battery inserted) before connecting to the PC for flashing.
7. If the higher up solution doesn't piece of work, so yous tin try holding down the Volume Downwards push button and connect the phone to the PC. Yous tin also endeavour holding Volume UP, Power and Volume Down, Ability, and Volume Up buttons.
8. Format the telephone from Settings before trying to flash the files again.

Fault 0xC0050003: BROM Error: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)

Meaning: SP flash tool encountered an error writing to one or more than partitions.

Solution:

1. Download the latest version of the Smart Phone Wink Tool and re-flash the firmware.
2. Try flashing 1 partition at a time to figure out which sectionalization is resulting in the error.
3. Try a unlike USB cable.
4. Connect the device to a different USB Port.
5. If the higher up solutions don't work, try using another PC.

Error 0xc002002A: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)

Pregnant: The firmware you're trying to flash is either non compatible with your device, or yous accept selected the wrong flashing settings or verified kick is enabled.

Solution:

1. Unlock the bootloader before flashing the firmware.
2. Ensure that the files yous're trying to wink are really for your device's verbal model.
3. Only tick the boxes only for the files which are bachelor in the ROM y'all're trying to flash.
4. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
5. Use the latest version of the Smartphone Flash Tool.
6. Delete the SP Wink Tool folder and re-excerpt information technology.
7. Ensure that the phone is switched off (with the battery inserted) earlier connecting to the PC for flashing.
8. If the above solution doesn't piece of work, then you can effort holding down the Volume Downwards button and connect the telephone to the PC. Y'all can also try holding Book UP, Power and Book Down, Power, and Volume UP buttons.
9. Format the phone from Settings earlier trying to wink the files once again.

Error 0XFA8: BROM Error: S_FT_DOWNLOAD_FAIL (0XFA8)

Meaning: SP flash tool encountered an error while attempting to flash the firmware.

Solution:

1. Brand certain that the device is switched off, and the battery is in the device before connecting for flashing.
2. Utilize the format option and then download it in the SP flash tool.
3. Try changing the Download Agent setting in Smartphone Flash Tool.
4. Try a different USB cable.
5. Try connecting the device to a different USB Port.
6. Try using a unlike PC.

Error 0x7D5: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)

Meaning: The device attempted to power on before the SP flash tool could wink the files to it.

Solution:

1. Make certain the battery is sufficiently charged on your device.
2. Take out and re-insert the battery.
3. Try using a dissimilar USB cable or COM port or PC.
4. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack three -> Apply -> OK -> Run flash_tool.exe as administrator.
5. Practice not agree any button when connecting to the PC.

Fault: Boundary Check Failed: rom_end_addr >= adjacent rom begin_addr.

Meaning: The firmware has a partition that wasn't included while bankroll up the firmware. SP Flash Tool encountered an error in the end address of the preloader sectionalisation and the begin address of the PGPT segmentation (i.e., the partition which wasn't included in the backup).

Solution:

1. Close the error bulletin and manually select the location of all the files in the scatter file from the lesser to the elevation. Meaning that a preloader would exist the last affair you volition select.
2. If that doesn't work, open and change the scatter file using Notepad++ so alter the "boundary_check: Truthful" to "boundary_check: Simulated".

Mistake 3179: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3179)

Significant: The firmware you're trying to flash is either non uniform with your device or you take selected the incorrect flashing settings.

Solution:

1. Ensure that the files you're trying to flash are actually for your device'south exact model.
2. Only tick the boxes only for the files which are available in the ROM y'all're trying to wink.
3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
4. Use the latest version of the Smartphone Wink Tool.
5. Delete the SP Flash Tool folder and re-extract it.
6. Ensure that the phone is powered off (with the battery inserted) before connecting to the PC for flashing.
7. If the in a higher place solution doesn't work, so y'all tin endeavour belongings downwardly the Volume Downwardly button and connect the phone to the PC. You lot can also try holding Volume Up, Power and Book Downward, Power, and Book UP buttons.
8. Format the telephone from Settings before trying to wink the files again.

Error 5073: BROM Fault: S_DL_READ_PT_FAIL (5073)

Meaning: Smartphone flash tool encountered an error while trying to format the device.

Solution:

• Use "download but" under the download tab to flash the firmware, and and so you can format the device if needed.

SP Wink Tool forcefulness-closes when scatter file is loaded

Meaning: SP Flash Tool doesn't support the scatter file because of its blocks or configuration.

Solution:

• Open the besprinkle file using Notepad++ and locate the last sectionalisation on the list (flashinfo) and alter the is_download: truthful to is_download: imitation. Once washed, salvage the scatter file and reload information technology in SP Flash Tool.

Storage blazon mismatch!

Message:

besprinkle storage type is HW_STORAGE_EMMC

target storage type is HW_STORAGE_NAND

(or)

scatter storage type is HW_STORAGE_EMMC

target storage type is HW_STORAGE_NONE

Pregnant: At that place is a mismatch between the device'south storage blazon and that which the scatter file expects.

Solution:

1. Try using a different firmware or ROM.
2. Try using SP Flash Tool version 3.x. If it doesn't work, try using different versions and make sure to run it as administrator.

Fault 8045: No Valid Segmentation Management Table (PMT) for storage

Pregnant: SP Flash Tool failed to place the device'due south partitioning ahead of the file writes.

Solution:

• Try flashing the firmware using Download only.

Error 1041: BROM ERROR: S_CHKSUM_ERROR (1041)

Meaning: At that place was a checksum error when flashing the firmware.

Solution:

1. Delete any file with the checksum in its proper noun from the ROM/firmware folder.
2. Go to Options > Option > Download > United nations-tick DA DL all with checksum.

Error 6126: BROM Fault: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE Code: 0x00

Pregnant: The ROM contains a checksum file, merely DA DL All With CheckSum is un-checked.

Solution:

• Tick DA DL All With Cheque Sum under Options > Selection > Download.

Fault 6128: BROM Error: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP ERROR Code: 0X00

Significant: The ROM contains a checksum file, just DA DL All With CheckSum is united nations-checked.

Solution:

• Tick DA DL All With Check Sum under Options > Pick > Download.

Error 0xC0050005: Fault STATUS_EXT_RAM_EXCEPTION (0xC0050005)

Meaning: The firmware yous're trying to flash is either not compatible with your device or you have selected the wrong flashing settings.

Solution:

1. Ensure that the files yous're trying to wink are really for your device's exact model.
2. Only tick the boxes merely for the files which are available in the ROM you're trying to flash.
3. Brand sure your device's battery is sufficiently charged.

Error (3): BROM Mistake:?? (iii)

Meaning: There is a problem with the format of the besprinkle file or files existence flashed. Instance – trying to wink .bin files using SP Flash Tool.

Solution:

• Check the scatter file and firmware files y'all are trying to flash to make sure that they're not meant to exist flashed using a dissimilar tool.

Error 6104: BROM Mistake: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP Fault Code: 0X00

Significant: Wrong flash settings or firmware/ROM files.

Solution:

1. Make sure you accept selected the correct Download Agent file in SP Flash Tool and are using the firmware meant for your device's exact model.
2. Go to Options > Selection > Connection > USB Speed > Full Speed.
3. Go to Options > Pick > Download > un-tick DA DL ALL with Checksum.

Error 3183: BROM Fault: S_CHIP_TYRE_NOT_MATCH (3183)

Meaning: SP Flash Tool believes that there is a mismatch betwixt the information provided in the scatter file and device info.

Solution:

1. Brand sure to apply the ROM/firmware for the exact device model.
2. Try using the higher version of the SP Flash Tool.
3. Uninstall and re-install the MediaTek MTK USB Drivers on your PC.

Mistake 0xC0060001: BROM Error: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)

Pregnant: The device attempted to ability on before the SP flash tool could flash the files to information technology.

Solution:

1. The device might crave a custom Download Agent (DA) to be flashed.
2. Make sure the bombardment is sufficiently charged earlier flashing.
3. Take out and re-insert the battery.
4. Endeavor using a different USB cable or COM port or PC.
5. Right click flash_tool.exe -> Backdrop -> Compatibility -> Set to Windows XP Service Pack 3 -> Employ -> OK -> Run flash_tool.exe as administrator.
6. Practise not concur whatsoever button when connecting to the PC.

Fault: PMT changed for the ROM; information technology must be downloaded

Significant: The partition table about to be written (from the besprinkle file) is unlike from the device's current division tabular array layout.

Solution:

1. Ensure that the scatter file and firmware/ROM files yous're trying to flash are for your device'south exact model.
2. If you're trying to flash simply a few files from the firmware, and so yous need to get the firmware to complement and then flash using download simply.
3. If you're trying to flash the consummate firmware, then endeavour using the "Firmware Upgrade" option or Format beginning before the "download simply" option.

Error 6004: Mistake: S_SECURITY_SLA_FAIL (6004), MSP ERROE CODE: 0X00

Meaning: The Download Agent file isn't compatible with the device.

Solution:

1. Try using a different Download Agent file.
2. Try using a different version of the Smartphone Wink Tool.
3. Ensure yous are using the right Authentication file.

Significant: The paradigm files you are trying to flash do non comprise –sign header.

Solution:

1. Use the SP Wink Tool v5.1532.00 – Download hither.
2. Load the Auth file for the device in the flash tool.
3. Endeavor flashing a manufacturing plant-signed firmware.
4. Flash the unsigned prototype using the 'Write Memory' tab in SP Flash Tool. To activate the write memory tab, press 'Ctrl + Alt + V' to enable advanced mode then click Window > Write Retention.

Error 2035: BROM Error: S_BROM_CMD_JUMP_DA_FAIL (2035)

Meaning: SP Flash Tool encountered an mistake connecting to the device.

Solution:

1. Ensure that the bombardment is inserted, and you're not holding any button when connecting the device to a PC for flashing.
2. Uninstall and re-install the MediaTek MTK VCOM Drivers.
3. Disable whatever modem managing director or software which might exist blocking ports on the PC.
4. Linux / Ubuntu users, make certain you installed 'libusb-dev' and so blacklist Ubuntu'due south modem manager (because it controls port /dev/ttyACM0, which is causing SP Flash Tool from running properly).

Fault 0x412: BROM Mistake: S_TIMEOUT (0X412)

Meaning: SP Flash Tool encountered a timeout when trying to flash, i.e., flashing took long to offset or consummate.

Solution:

1. Make certain that files are loaded in SP Flash Tool with a valid location. The location should non be empty.
2. Attempt flashing ane file at a time.
3. Try using a higher version of the Smart Phone Flash Tool.
4. Un-tick larger files or notice smaller alternatives.

Mistake 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE Lawmaking: 0x00

Meaning: SP Wink Tool failed to authenticate the files you are trying to flash.

Solution:

1. Try another ROM/firmware from a different source.
2. Go an Auth file for your device model.
3. For Tecno, Infinix, and Itel devices, use Software Download Tool (Format + Download).

Error 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]

Meaning: The SP Flash Tool Fault Code 0x93AF means that the tool encountered a checksum error.

Solution:

1. Open the checksum file using Notepad++ and search for 0x93af and supercede it with 0x94ae.
2. Delete any checksum file from the ROM/firmware files.

Error 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)

Meaning: The scatter file has an wrong format. It has been badly created or modified.

Solution:

1. Download a different scatter file that doesn't throw an error in SPFT. Now open up the two scatter files using Notepad++, and you will notice that the incorrect besprinkle file has the items slightly shifted to the left. Edit the wrong scatter file to the same format as in the working besprinkle file.
2. After modifying the scatter file using the above method, use the latest version of SP Flash Tool eastward.g., SP Wink Tool v5.1728.
3. Download some other ROM/firmware from a different source.

Mistake 0xC52: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (0XC52)

Meaning: SP Wink Tool was unable to flash files to the device.

Solution:

1. Brand sure to use the latest version of the SP Flash Tool and run it as ambassador.
2. Format beginning and so Download.
3. Un-tick the box with an unspecified/empty file path.
4. Ensure that the bombardment is sufficiently charged and the device is switched off earlier connecting to the PC for flashing.
5. Try a different ROM from a different source.
6. Attempt formatting the device first earlier flashing the files.
7. Try a different USB cable.
8. Connect the device to a different USB Port.
9. If the above solutions don't work, endeavour using another PC.

Error 0XFAA: BROM ERROR: S_FT_FORMAT_FAIL (0XFAA)

Pregnant: The source (firmware) doesn't properly match with the target (telephone).

Solution:

1. Try using a different firmware for your device model.
2. Ensure you're using the right tool for flashing the firmware.

Fault 5072: ERROR: S_DL_WRITE_PT_FAIL (5072)

Meaning: SPFT encountered a problem writing to ane or more partitions.

Solution:

1. Make sure the device is powered off with a charged battery inside before connecting to the PC for flashing.
2. Don't concur any buttons when connecting to the PC.
3. Try a unlike USB cable.
4. Connect the device to a different USB Port.
5. If the above solutions don't piece of work, endeavour using some other PC.

Fault 0xC0070004: ERROR: STATUS_DA_HASH_MISMATCH (0xC0070004)

Significant: Hash (integrity) cheque for the images being flashed is failed.

Solution:

1. Use SP Flash Tool v5.1516.00 – Download from here.
2. Make sure to select the right Download Agent file.
3. Navigate to Options > Option > Download > Un-tick DA DL all with checksum.

Error 6046: BROM ERROR: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP Fault CODE: 0X0

Meaning: The SP Flash Tool Fault Code 6046 refers to the failed signature verification for the firmware files.

Solution:

1. Select MTK_AllInOne_DA.bin every bit Download Agent file.
2. Navigate to Options > Pick > Download > Un-tick DA DL all with Checksum.
3. Delete any checksum file in the ROM/firmware folder.

Error 0XC0060003: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

Meaning: Smart Phone Flash Tool is unable to read or write to the device using the selected Download Agent.

Solution:

1. The device might require a custom Download Agent (DA) to be flashed.
2. Make sure the battery is sufficiently charged before flashing.
3. Take out and re-insert the battery.
4. Try using a dissimilar USB cable or COM port or PC.
5. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack three -> Utilize -> OK -> Run flash_tool.exe equally administrator.
6. Do not hold whatever button when connecting to the PC.

Error 0x94010000: CHIP Type NOT match! target refuse value: 0x94010000

Meaning: The device likely has a locked/encrypted preloader.

Solution:

• Un-tick preloader when flashing in SP Flash Tool.

Error 0xC0020029: BROM Mistake: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)

Meaning: You are trying to wink the modified files to a device that accepts only signed or verified images.

Solution:

1. Download and flash the official firmware for your device (normally have –verified or –signed prefixes in their filename).
2. If possible, unlock the bootloader of your device and and so try re-flashing.

Error 5000: BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY (5000)

Meaning: The device has a secure kick/bootloader.

Solution:

1. You volition need an Auth (*.auth) file or custom Download Agent (DA) file for the device to go on with flashing using SP Flash Tool.
2. For Tecno, Infinix, and Itel devices, utilise Software Download Tool (Format + Download).

Mistake 0xC002002C: Mistake: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)

Meaning: The device has a verified kicking.

Solution:

• Download and flash the official firmware for your device (usually take –verified or –signed prefixes in their filename).

Error 0xC0030012: ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)

Meaning: The device has a secure boot.

Solution:

• You volition need an Auth (*.auth) file or custom Download Agent (DA) file for the device to proceed with flashing using SP Flash Tool.

Fault 0xC0060005: ERROR: STATUS_BROM_CMD_FAIL (0xC0060005)

Pregnant: The device attempted to ability on before the SP Flash Tool could flash files to it.

Solution:

• You lot will need a custom Download Agent (DA) file for your device model.

Error 8: Mistake: ?? (viii)

Pregnant: The size of a file is larger than the available division size.

Solution:

1. Make certain that the firmware files you lot are trying to flash are actually for your device's exact model.
2. Try another Stock ROM from a different source.
3. Alter the device's EMMC chip.
4. Endeavor using a different PC.

Mistake 0xC0030001: Error: STATUS_SCATTER_FILE_INVALID (0xC0030001)

Pregnant: SP Wink Tool cannot recognize the scatter file or the location of the scatter file.

Solution:

1. Rename the folder location of the scatter file, including the parent folders besides, and remove all special characters / non-English characters from the folder name.
2. If that doesn't piece of work, then create a new folder on your desktop and copy But the firmware files to the new folder and then retry flashing the contents from the new folder.

Fault: Partition[nvram] should NOT set "is_download" to true in scatter file

Meaning: The scatter file specifies to download NVRAM simply doesn't specify a file name for NVRAM. This error is mutual in after versions of the SP Flash Tool.

Solution:

1. Modify the scatter file using notepad++ and add a file name for the NVRAM partition. e.g., "file_name: nvram.bin" then salve and ensure in that location's a nvram.bin file in the aforementioned folder equally the scatter file.
2. If that doesn't work, modify the scatter file using notepad++ and set "is_download: false" for the NVRAM partition.

Mistake 0xC0050001: ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)

Pregnant: The firmware y'all are trying to wink is either not compatible or you have selected the wrong flashing settings.

Solution:

1. Make certain that the firmware you are trying to wink is actually for your device model.
2. Just tick the boxes only for the files which are available in the ROM folder yous're trying to flash.
3. Uninstall and re-install MediaTek Preloader VCOM USB Drivers.

Mistake 0xC002001B: ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)

Pregnant: The device has a verified boot.

Solution:

• Download and flash the official firmware for your device (usually have –verified or –signed prefixes in their filename).

Error 5014: ERROR: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)

Pregnant: The scatter file was desperately created or modified, depending on how y'all obtained the besprinkle file.

Solution:

• Input the correct values for all "physical_start_addr" in the scatter file. The exact value for "physical_start_addr" is the same every bit the value of "linear_start_addr".

Error 0x7F3: BROM ERROR: S_BROM_CMD_JUMP_DA_FAIL

Meaning: SP Flash Tool is having trouble communicating with the device.

Solution:

1. Ensure that the battery is inserted, and you're not belongings any button when connecting the device to a PC for flashing.
2. Uninstall and re-install the MediaTek Preloader Drivers.
3. Disable any modem manager or software which might be blocking ports on the PC.
4. Linux / Ubuntu users, brand sure you installed 'libusb-dev' then blacklist Ubuntu's modem manager (because it controls port /dev/ttyACM0, which is causing SP Wink Tool from running properly).

Error 3154: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3154)

Meaning: SP Wink Tool Error Lawmaking 3154 means that the flash tool is having trouble flashing files to the device.

Solution:

1. Make sure to use the latest version of the SP Wink Tool and run it every bit administrator.
2. Format beginning so Download.
3. Un-tick the box with an unspecified/empty file path.
4. Ensure that the battery is sufficiently charged and the device is switched off earlier connecting to the PC for flashing.
5. Attempt a unlike ROM from a different source.
6. Try formatting the device first earlier flashing the files.
7. Endeavor a different USB cable.
8. Connect the device to a different USB Port.
9. If the above solutions don't work, endeavor using another PC.

Fault 0xC0010005: BROM Error: STATUS_PROTOCOL_ERR (0xC0010005)

Meaning: SP wink tool is having trouble communicating with the device.

Solution:

• Make sure that the phone is switched off with the battery inserted before connecting to the PC for flashing.

Fault 0xC0010007: BROM ERROR: INSUFFICIENT_BUFFER (0xC0010007)

Meaning: SP Flash Tool seems to be blocked from flashing files to the device.

Solution:

• If you can boot your device into Fastboot Mode, then unlock the bootloader and so attempt flashing again.
• United nations-tick OEM then retry flashing.

Error 0xC0050007: ERROR: STATUS_READ_DATA_EXCEPTION (0xC0050007)

Meaning: SP Flash Tool is unable to readback from the connected device. This mistake normally occurs, especially when the readback length is likewise big.

Solution:

1. Download and install updated MTK drivers on your PC.
2. If you're performing a readback, try skipping enshroud and userdata.

Fault 0x13CD: BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069)

Meaning: The size of a file is larger than the bachelor partition size.

Solution:

1. Brand sure that the firmware files you are trying to wink are actually for your device's exact model.
2. Attempt some other Stock ROM from a different source.
3. Modify the device's EMMC flake.

Error: LIB DA not match, please re-select DA or inquire for aid

Meaning: SP Flash Tool is having trouble using the selected Download Agent (DA) file.

Solution:

1. Un-tick "Check LIB DA lucifer" from the SP Flash Tool general settings (Options > Choice).
2. Try another version of the SP Wink Tool.

Error -1073283068: BROM Fault: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE Lawmaking: 0X00

Significant: The Download Amanuensis (DA) file selected isn't compatible.

Solution:

• Try using Download Amanuensis (DA) + Auth file + Factory ROM.

Error 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)

Meaning: The device likely has a protected preloader or bootloader.

Solution:

• Un-tick preloader when flashing in SP Flash Tool.

Error 3152: S_DA_SDMMC_CONFIG_FAILED (3152)

Significant: The device likely has a protected preloader or bootloader.

Solution:

• United nations-tick preloader when flashing in SP Wink Tool.

Error 0xC0020006: Mistake: STATUS_SEC_PL_VFY_FAIL (0xC0020006)

Significant: The device likely has a protected preloader or bootloader.

Solution:

1. Try using a signed ROM/firmware.
2. Try unlocking the bootloader before flashing.

Error 0xC0030003: ERROR: STATUS_DA_SELECTION_ERR (0xC0030003)

Pregnant: The Download Amanuensis (DA) file selected is incompatible.

Solution:

1. Try using a different Download Agent file.
2. Try using Download Agent (DA) + Auth file + Mill ROM.
3. Try using a different version of the Smartphone Flash Tool.
4. For Tecno, Infinix, and Itel devices, use Software Download Tool.

Error 0xC0030008: ERROR: STATUS_INVALID_GPT (0xC0030008)

Meaning: EMMC bit is faulty on the device.

Solution:

• Change the device's EMMC bit.

Error 0xC0050004: Error: STATUS_UPLOAD_EXCEPTION (0xC0050004)

Meaning: SP Flash Tool is unable to communicate with the device.

Solution:

1. Attempt flashing with/without the battery inserted.
2. Try a dissimilar USB cable.
3. Connect the device to a unlike USB Port.
4. If the above solutions don't work, try using another PC.

Error 0x1: ERROR: ?? (0x1)

Pregnant: SP flash tool is having trouble communicating with the device.

Solution:

• Try using a custom Download Agent (DA) and Auth file for your device model.

Error 0xC0030004: Fault: STATUS_PRELOADER_INVALID 0xC0030004

Meaning: There is a problem with the preloader division name in the scatter file or the wink tool is having trouble communicating with the device.

Solution:

1. Modify the scatter file using Notepad++ and change the partition proper noun to all lower cases. Ex: PRELOADER to preloader or to lucifer the exact file name in the firmware and salve the scatter file.
2. Try belongings the volume up or book downwardly button before connecting the phone to the PC.
3. If you get an error while trying to format, return to the download tab and tick the checkbox for the preloader, then return to the format tab and retry formatting.

Mistake 1003: Fault: S_INVALID_BBCHIP_TYPE (1003)

Pregnant: There is a problem with the scatter file.

Solution:

• Brand sure to use SP Flash Tool compatible besprinkle file.

Error 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)

Meaning: The SP Flash Tool version you are using doesn't support your device or chipset.

Solution:

1. Make sure yous are using the latest version of the SP Flash Tool.
2. Navigate to Options > Option > Un-tick Storage Life Cycle Bank check.

Fault 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)

Meaning: The size of a file is larger than the available partition size, or the file isn't verified or signed.

Solution:

1. Ensure that the files yous're trying to flash are actually for your device's verbal model.
2. Look for unlike firmware/ROM.
3. Alter the phone's EMMC chip.
4. Try using a unlike PC.

Error 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Meaning: The SP Flash Tool is having trouble connecting with the phone, or you are flashing the wrong firmware.

Solution:

1. If you lot were holding buttons, try flashing without pressing whatsoever buttons (vice versa).
2. Effort flashing a dissimilar firmware or at least the preloader from a different firmware.

These were the list of SP Flash Tool Errors and solutions to set up them. Do share this with your friends on Facebook, Twitter, and other social networking sites, etc., and help them in fixing SP Wink Tool Error they are facing.

Have we missed whatsoever SP Flash Tool BROM Mistake? So do permit usa know in the comment department beneath.

👇👇Latest Video on YouTube 👇👇

'; } ?>

This page may contain affiliate links so we earn a committee. Please read our affiliate disclosure for more info.

Invalid Link Provided, Please Login From Exe Nck Error

DOWNLOAD HERE

Source: https://www.gizmoadvices.com/list-sp-flash-tool-error-codes-solution-fix/

Posted by: edwardfortint.blogspot.com